Articles

Below you can find a list of published scientific papers and MIA papers (papers that participated in the Mimics Innovation Awards).

You can use the Subject Filter to search for specific articles.

  • Biomechanical modeling of eye trauma for different orbit anthropometries
    A.A. Weaver, K.L. Loftis, S.M. Duma, J.D. Stitzel
  • Identity Transfer and Identity Restoration in Facial Allotransplantation
    Ajay Modgil
  • Contact forces in several TKA designs during squatting: A numerical sensitivity analysis
    B. Innocenti, S. Pianigiani, L. Labey, J. Victor, J. Bellemans
  • Anatomical and functional changes in the upper airways of sleep apnea patients due to mandibular repositioning: A large scale study
    Cedric Van Holsbeke, Jan De Backer, Wim Vos, Pascal Verdonck, Peter Van Ransbeeck, Tom Claessens, Marc Braem, Olivier Vanderveken and Wilfried De Backer
  • Patient-Specific Prosthetic Fingers by Remote Collaboration–A Case Study
    John-John Cabibihan
  • Investigation of hemodynamics in the development of dissecting aneurysm within patient-specific dissecting aneurismal aortas using computational fluid dynamics (CFD) simulations
    K.M. Tse, P. Chiu, H.P. Lee, P. Ho
  • Large Eddy Simulation of the pharyngeal airflow associated with Obstructive Sleep Apnea Syndrome at pre and post-surgical treatment
    Mihaescu M, Mylavarapu G, Gutmark EJ, Powell NB.
  • The effects of modeling simplifications on craniofacial finite element models: The alveoli (tooth sockets) and periodontal ligaments
    Sarah A. Wood, David S. Strait, Elizabeth R. Dumont, Callum F. Ross, Ian R. Grosse
  • Mechanics of biting in great white and sandtiger sharks
    T.L. Ferrara, P. Clausen, D.R. Huber, C.R. McHenry, V. Peddemors and S. Wroe
  • Study on influence of implant thickness and fixation position on implant stability using finite element analysis
    D. Devika, G. Arumaikkannu
  • Interdisciplinary approach for the 3D analysis of spinal growth modulation as a novel fusionless scoliosis treatment
    D. Glaser, J. Doan, V. Upasani, C. Farnsworth, P. Newton
  • Resected femoral anthropometry for design of the femoral component of the total knee prosthesis in a Korean population
    Dai-Soon Kwak, Chang Whan Han, Seung-Ho Han
  • A hollow cranial prosthesis design using a virtual donor
    G.H.L. Paschoal, J.V.L. Silva, C.A.R. Amaral, F.G. Roland
  • Customized silicone prostheses for chest wall deformities using alginate impression of external contour and 3-D CT reconstruction with Mimics software
    J. McPhail
  • Three-dimensional morphology and kinematics of the craniovertebral junction in rheumatoid arthritis
    R. Takatori, D. Tokunaga, H. Hase, Y. Mikami, T. Ikeda, T. Harada, K. Imai, H. Ito, T. Nishimura, H.S. An, N. Inoue, T. Kubo
  • Three-dimensional modeling using Mimics software for temporomandibular joint dysfunction diagnosis and craniomandibular pain syndromes management by novel ultrasound guided technique
    R.V. Bubnov, O.G. Kyselova
  • Design and primary application of computer-assisted, patient-specific navigational templates in metal-on-metal hip-resurfacing arthroplasty
    Y.Z. Zhang, J. Ou-Yang, S. Lu, J.M. Zhao, G.X. Pei
  • Modeling of the stress-strain state of the tibia-fixator
    A. Sitnik, A. Kovenya, T. Kovenya, D. Chernysov
  • Developing a novel finite element model for patient-specific cranio-facial stress analysis
    I.M. Dagsuyu, I. Kaymaz, C.M. Buyukkurt
  • Analysis of ballistic impact performance of an advanced combat helmet and interior cushioning system on a Hybrid3 headform
    Long Bin Tan, Heow Pueh Lee, Vincent Beng Chye Tan
  • Combining Mimics reconstructions of vascular pathologies with Fluid-Structure Interaction (FSI) modeling for improving clinical diagnostic capabilities
    M. Xenos, S. Rambhia, X. Liang, Y. Alemu, I. Lavi, S. Rambhia, S. Einav, N. Labropoulos, A. Tassiopoulos, N. Sakalishasan, D. Bluestein
  • A preprocessing approach for innovative patient-specific intranasal flow simulations
    M.J. Krause, T. Gengenbach, R. Mayer, S. Zimny, V. Heuveline
  • CFD analysis of abdominal aortic aneurysm growth
    R.J. Lozowy, D.C.S. Kuhn, A.J. Bond
  • Integrated application of three-dimensional modeling to study nerves anatomy for regional anesthesia under ultrasound guidance based on the expert segmentation of sonographic images using Mimics software
    R.V. Bubnov
  • The influence of jaw raising and jaw reducing muscle groups on condyle biomechanics after mandible bilateral sagittal split ramus osteotomy
    X. Qi, L. Ma, S. Zhong
  • Numerical simulation of mechanisms of deformation, failure and energy dissipation in porous rock media subjected to wave stresses
    Y. Ju, H. Wang, Y. Yang, Q. Hu, R. Peng
  • Identity transfer and identity restoration in face transplantation
    A. Modgil
  • The effect of patient-specific scaling on the estimation of glenohumeral joint reaction forces
    Ali Asadi Nikooyan
  • Patient-specific modeling of the shoulder joints using Mimics
    B. Bolsterlee
  • Replacing vascular corrosion casting by in vivo micro-CT imaging for building 3D cardiovascular models in mice
    B. Vandeghinste, B. Trachet, M. Renard, C. Casteleyn, S. Staelens, B. Loeys, P. Segers, S. Vandenberghe
  • Determining the Hounsfield value of the cortico-cancellous interface in the Proximal Humerus for mapping internal cortical geometry, an experimental study
    Daren Lim Fat
  • Humeral shaft cortical thickness map - statistical morphological analysis based on high resolution CT data
    G.T. Gomes, K. D'Herde, L. De Wilde
  • Anatomical parameters for a biomechanical wrist and hand model
    Judith M.A. Visser
  • Three-dimensional reconstruction from computerized tomography images of respiratory system in New Zealand rabbits
    K. Belosuk, M.O. Dayan
  • Reliability of the glenoid plane
    L.F. De Wilde, T. Verstraeten, W. Speeckaert, A. Karelse
  • A 3D construct of the aging eyebrow: the illusion of volume loss
    P. Konstantinos, M. Ronald, C.S. Holly, C.G. Helene, J. Imran, K. Adam, F.-P. Erin, H. Catherine, D. Raymond, G. Robert
  • The craniomandibular mechanics of being human
    S. Wroe, T.L. Ferrara, C.R. McHenry, D. Curnoe, U. Chamoli
  • Loading and misfit on angulated implants - a finite element analysis
    C.U. Voigt, D.G. Howes, L.C. Cumming, P. Naude
  • Does cribriform morphology predict olfactory function?
    D. Bird, P. Green, B. Van Valkenburgh
  • Characterisation of irregular stress distributions induced by congenital Klippel Feil Syndrome
    E.C. Leung, N. Sarigul-Klijn, R.F. Roberto
  • Finite element analysis of incisor biting in adult and juvenile tufted capuchin (Cebus libidinosus) crania
    J. Chalk, B.G. Richmond, B.W. Wright
  • Understanding the transition from positive to negative Poisson's ratio behavior in cellular materials and the potential for auxeticity in trabecular bone
    J. Matheny, L. Berhan
  • Radiation induces brittle bone failure
    J.D. Wernle, M.J. Allen, K.A. Mann
  • In vivo three-dimensional morphometric analysis of the lumbar spinal bony canal in healthy and low back pain patients
    J.S. An, A.A. Espinoza Orias, H.S. An, N. Inoue
  • Reliability of the glenoid plane
    L.F. De Wilde, T. Verstraeten, W. Speeckaert, A. Karelse
  • 3D visualisation of avian flight muscles - the Australian laughing kookaburra (Dacelo novaeguineae)
    M. Quayle, S. Wroe, C. McHenry
  • Use of CT data and Mimics software for TemporoMandibular joint prosthesis positioning and customization
    M. Târcolea, D. Vlasceanu, R.M. Comaneanu, M.C. Cotrut
  • Use of CT data and Mimics software to solve a severe mandible trauma situation
    M. Târcolea, R.M. Comaneanu, D. Vlasceanu, M.C. Cotrut
  • Computer assisted surgical planning in THR and fabrication of hip prostheses via additive manufacturing technologies
    S. Rahmati, F. Farahmand, F. Abbaszadeh
  • 1-metatarsal helical axis and angle measurements in subjects with bunion as compared to controls
    W.M. Glasoe, V. Phadke, D.J. Nuckley, F. Pena, P.M. Ludewig
Showing 1-50 of 500 results